Pole
- Naturally seasoned Beechwood with anti-mould treatment in diameters: Ø 36, Ø 38, Ø 40 mm.
- Aluminium with special corrosion-proof anodising in diameters:
Ø 35, Ø 40 mm.
- AISI 316 stainless steel available in diameter Ø 40 mm only.
N.B. The poles are normally rigid.

On request, the poles can be fitted with an articulated joint for tilting.
Wooden poles have a brass coupling.
Aluminium poles are normally supplied with a standard coupling.
Bayonet or screw type fittings are available on request.
We recommend the special fitting shown on page 24
The ribs are in steel and available in sizes:
- cm 80 - cm 90 - cm 100 - cm 110 - cm 120 - cm 130
 

Rib thickness:
- Standard Ø 4.20 mm
- Large Ø 4.50 mm
- Extra large Ø 5.00 mm
Rib treatment:
- plastic-coated for standard type.
- galvanised and then plastic-coated for large and extra-large to
provide double corrosion protection.
 

Cover:
- Dralon = yarn dyed synthetic fabric.
- Polyester = medium duty paste dyed synthetic fabric.
- Mocrilmare = heavy duty paste dyed 100% acrylic fabric.
N.B. Paste dyed fabrics are exceptionally colourfast even after very long exposure to sunlight.
All umbrella covers are sewn with the 4-thread ZIG-ZAG system using rot-proof thread.

The covers of the Mediterraneo, Tirreno, Adriatico and Egeo beach umbrellas are held in place by reinforced pockets in which the ends of the ribs are inserted.

The cover of the Ionio beach umbrella is anchored to the ends of the pockets using stainless steel screws and special fabric reinforcing. This system has two advantages: provides safe anchoring at the most vulnerable points of the umbrella and makes cover removal easy.